Bay Devices     FP52

■ Sophisticated fan control logic

■ Wide temperature range

■ Beautiful sapphire neon LCD

■ Aluminum bezels and polished buttons

         To alleviate the increasing trend of higher fan noise, we created an award-winning smart fan controller that doubles as a system monitor and an alarm clock. After a brief setup, the FP52 will take control of your most important fans so there are no constant user interventions or monitoring needed as fans change speeds by themselves based on temperature. Coupled with a smoothly finished aluminum bezel, the FP52 is truly the intelligent choice for both seeking performance and style.


Color Black, Silver
Material Aluminum front panel, steel sides
Cooling system Dual air intake mesh
Application 5.25" drive bay
Fan Output 0V, 6 ~ 12V
LCD Display Temperature, fan speed, alarm clock, time, system status
Temp. Range 0 ~100°C
Cable length 800mm
Net weight 220g
Dimension 158 mm (W) x 42 mm (H) x 85 mm (D)
6.22" (W) x 1.65" (H) x 3.35" (D)
Remark :
Maximum output for one channel – 0.8amp (9.6W)
Maximum combined output for all three channels – 1.5amp (18W)
Performance Standard ATX tower chassis with aluminum unibody more...
Extreme enthusiast extended ATX tower chassis more...
Refinement of classic small form factor case more...
FP52 Manual
1,298 KB

A:Maximum output for one channel ¡V0.8amp
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.

A:The FP52 accepts only fans powered by 3pin connectors so you will need to use a 4pin to 3pin adapter for your 4pin fans.

A:Please make sure all the connections to FP52 are correct and double check your temperature settings again. There are three temperature values (CPU, SYS, HDD), if any of them are exceeded, the alarm will sound.

A:Your FP52 maybe defective. Please contact the SilverStone office closest to you for information on how you can obtain a replacement unit:

A:Please check to see if the battery for the FP52 is properly seated in its slot. If it is, then the battery may need to be replaced. The FP52 uses "CR2032" sized lithium battery that is readily available in most electronics store.